Prometheus node_exporter on Fedora

Prometheus provides a server-level metrics exporter called node_exporter that reports hardware & kernel-level metrics. However, I found the container deployment method in Docker to be too extreme, and there was no clear documentation for setting it up manually or any officially supported package on Fedora.

Other unofficial online resources didn't mention working with SELinux or firewalld, so this guide outlines how to set up a basic node_exporter daemon on a Fedora 41 server.

Download and extraction

Fairly straightforward, find your appropriate version on the downloads page and download it:

curl -JLO https://github.com/prometheus/node_exporter/releases/...

and extract it:

tar -xvf node_exporter-1.9.1.linux-amd64.tar.gz

User creation and manual installation

Manual installation involves moving the executable to the /usr/local/bin/ directory, which is specifically for programs that normal users can run.

sudo mv node_exporter-1.9.1.linux-amd64/node_exporter /usr/local/bin/

Create the node_exporter user & group for the service account that runs the binary, and apply them to the binary. It does not need to run with any special privileges to gather metrics, and the login shell is disabled for security:

sudo useradd -rs /sbin/nologin node_exporter
sudo chown node_exporter:node_exporter /usr/local/bin/node_exporter

Systemd unit file

Create the systemd unit file at /etc/systemd/system/node_exporter.service:

[Unit]
Description=Node Exporter
After=network.target

[Service]
User=node_exporter
Group=node_exporter
Type=exec
Restart=always
ExecStart=/usr/local/bin/node_exporter --web.listen-address="0.0.0.0:9100"

[Install]
WantedBy=multi-user.target

This is a very simple configuration that gets node_exporter listening on all interfaces on the default port 9100.

SELinux relabelling

Depending on where/how you downloaded it, the binary will likely have an incorrect SELinux label:

[gadget@trinity ~]# ls -Z /usr/local/bin/
unconfined_u:object_r:user_home_t:s0 node_exporter

This means that attempting to start it will fail. This is the journalctl log, and you can see SELinux kicking in with the AVC line:

...
May 12 17:11:45 trinity audit[569311]: AVC avc:  denied  { execute } for  pid=569311 comm="(exporter)" name="node_exporter" dev="dm-0" ino=180936 scontext=system_u:system_r:init_t:s0 tcontext=unconfined_u:object_r:user_home_t:s0 tclass=file permissive=0
May 12 17:11:45 trinity (exporter)[569311]: node_exporter.service: Unable to locate executable '/usr/local/bin/node_exporter': Permission denied
May 12 17:11:45 trinity (exporter)[569311]: node_exporter.service: Failed at step EXEC spawning /usr/local/bin/node_exporter: Permission denied
May 12 17:11:45 trinity systemd[1]: node_exporter.service: Main process exited, code=exited, status=203/EXEC
May 12 17:11:45 trinity systemd[1]: node_exporter.service: Failed with result 'exit-code'.
...

Fixing this is easy since the binary is located in the correct directory. The restorecon command with the recursive flag (-R) will apply the parent folder's label to its children, and /usr/local/bin is already defined with a specific label:

sudo restorecon -R -v /usr/local/bin/

In this case, SELinux is in targeted mode rather than MLS mode, so unconfined_u is still allowed to run:

[gadget@trinity ~]# ls -Z /usr/local/bin/
unconfined_u:object_r:bin_t:s0 node_exporter

Open firewall port

If firewalld is enabled and running (the default), you will need to open its port to query the metrics from another host.

You can check the active firewalld zone with:

[gadget@trinity ~]$ firewall-cmd --get-active-zones
public (default)

Then, add the port as an exception to the zone:

sudo firewall-cmd --zone=public --add-port=9100/tcp --permanent
sudo firewall-cmd --reload

Start node_exporter and test

Enable and start node_exporter in one line:

sudo systemctl enable --now node_exporter

and from another host, query the endpoint:

curl trinity.local:9100/metrics

You will be greeted by a wall of metrics:

# HELP go_gc_duration_seconds A summary of the wall-time pause (stop-the-world) duration in garbage collection cycles.
# TYPE go_gc_duration_seconds summary
go_gc_duration_seconds{quantile="0"} 3.7163e-05
go_gc_duration_seconds{quantile="0.25"} 8.5233e-05
go_gc_duration_seconds{quantile="0.5"} 9.2137e-05
go_gc_duration_seconds{quantile="0.75"} 0.000103134
go_gc_duration_seconds{quantile="1"} 0.000114001
go_gc_duration_seconds_sum 0.001062938
go_gc_duration_seconds_count 12
# HELP go_gc_gogc_percent Heap size target percentage configured by the user, otherwise 100. This value is set by the GOGC environment variable, and the runtime/debug.SetGCPercent function. Sourced from /gc/gogc:percent
# TYPE go_gc_gogc_percent gauge
go_gc_gogc_percent 100
# HELP go_gc_gomemlimit_bytes Go runtime memory limit configured by the user, otherwise math.MaxInt64. This value is set by the GOMEMLIMIT environment variable, and the runtime/debug.SetMemoryLimit function. Sourced from /gc/gomemlimit:bytes
# TYPE go_gc_gomemlimit_bytes gauge
go_gc_gomemlimit_bytes 9.223372036854776e+18
# HELP go_goroutines Number of goroutines that currently exist.
# TYPE go_goroutines gauge
go_goroutines 7
...

Resources

• Prometheus Node Exporter home page